SenTech 2.0 Megapixel Near IR Highspeed GigE

The CMC2MPOE-IR is 2 Megapixel Near Infrared (2048 x 1088) Gige Vision compliant camera with a 2/3″ CMOSIS Sensor capable of frame rates up to 50 Hz. It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D). SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications. Windows and Linux drivers and SDK are available in the document section below.

$1,329.00

Out of stock

SKU: 148 Categories: GigE Cameras, Industrial Cameras, Sentech Cameras

18 Month Extended Warranty

Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.

Look for the 18 Month Warranty Gold Seal for participating products.

Description Specifications Documents

Product Description

SenTech STC-CMB2MPOE-IR Megapixel HighSpeed Near Infrared CMOSIS w/ Gige Vision

The CMB2MPOE-IR camera features a 2/3″ CMOSIS Sensor with a 2048×1088 pixel array capable of full frame rates of 50 Hz. The imaging sensor has enhanced sentivity from 690nm to 1000nm. It has an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D). SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.

Features:

Gige Vision Compliant
Enhanced Near Infrared Response
2/3″ 2M CMOSIS (CMV4000）
50 Full Frames Per Second
Global Shutter
10 bit ADC 8 or 10 bit Raw data
Opt-isolated I/O

STC-CMB2MPOE Details

Imaging

Image Sensor	2/3" 2MP B&W CMOS (CMOSIS: CMV2000)
Shutter Type	Global Shutter
Total Picture Element	2048 (H) x 1088 (V)
Active Picture Element	2048 (H) x 1088 (V)
Cell Size	5.5 (H) x 5.5 (V) μm

Function
Scanning System	Progressive
Vertical Frequency (Frame Rate)	50 Hz at full resolution (25Hz on 10bit for ether net bandwidth limitation), 1.00000 to 780 Hz adjustable via the communication, (Frame rate depends on the AOI setting), Maximum frame rate (780 Hz) is when vertical resolution AOI setting is 32.
Horizontal Frequency	58.1KHz (2TAP), 38.8KHz (1TAP)
Pixel Frequency	120 MHz (2TAP), 80 MHz (1TAP)
Noise Level	-
- @ 8 Bit Output	<= 2.5 Digit (Gain 0 dB)
- @ 10 Bit Output	<= 15 Digit (Gain 0 dB)
Minimum Scene Illumination	Less than 1 Lux @ F1.2, 50 Hz
Sync System	Internal
Video Output Format	Digital 8, 10 bit Raw data or RGB 8 bit (Default:8bit Raw)
Interface	IEEE802.3 (1000BASE-T)
Protocol	GigE Vision® 1.2 and GenICam™ 2.0 Compliant
Exposure Time	Preset continuous mode: 25 microseconds to 2000 milliseconds, Preset trigger mode:25 microseconds to 2000 milliseconds, Pulse width mode: 25 microseconds to 2000 milliseconds
ALC (Automatic Light Compensation)	Automatic Exposure (AE) and Automatic Gain Control (AGC) (ON/OFF) (adjustable via the communication), (Default: AE OFF, AGC ON)
Gain	x1 to x3 (Default: x1)
Gamma	Gamma 1.0 (Factory default) or uploadable gamma table (Default:1)
AOI Function	Variable AOI setting via the communication
Color Interpolation	Available on RGB Output (Default:ON)
White Balance	Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF)
Operating Mode	Edge preset trigger, Pulse width trigger (Default:OFF)
Communication	UART Communication through Ethernet port
I/Os	One opt-isolated input and two open collector outputs(+3.3V)

Mechanical
Power	-
- Input Voltage	+10.8 ~ +26.4 Vdc
- Consumption	Less than 3.6 W
Dimensions	35 (W) x 35 (H) x 55.9 (D) mm excluding connectors
Optical Filter	No Filter
Optical Center Accuracy	Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg
Material	Aluminum (AC)
Lens Mount	C Mount
Connectors	RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount Screws	Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)
Weight	Approx. 120g

Environmental
Operating Temperature	-
- Minimum	Environmental Temperature: -5°C
- Maximum	Camera housing temperature (top plate) shall not exceed 65⁰C, (This corresponds to an environmental temperature of approximately 35⁰C)
Storage Temperature	Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration	20Hz ~ 200Hz ~ 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock	Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy	EMS: EN61000-6-2, EMI: EN55011
RoHS	RoHS Compliant

Visit Sentech America For Additional Information

Documents

DescriptionTypeSizeDownload


STC-CMB2MPOE-IR Datasheet	PDF	5.1M	Download File
STC-CMB2MPOE-IR User Guide	PDF	2.2M	Download File
Mechanical Drawings	PDF	75k	Download File
GigE Windows SDK & Drivers	Zip	280Mb	Download File
GigE Linux Drivers	Zip	7Mb	Download File

About us

Industrial Camera Sales works with top level distributors for all major vision hardware manufacturers and drop ships to you on razor thing margins to bring you the best value. Our goal is to simply streamline your purchasing process, saving you time and money.

SenTech 2.0 Megapixel Near IR Highspeed GigE