SenTech 2.0 Megapixel Near IR Highspeed USB

The MBCM200U3V-IR is 2 Megapixel Near Infrared (2048 x 1088) USB3 Vision compliant camera with a 2/3″ CMOSIS Sensor capable of frame rates up to 167 Hz. It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D). SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications. Windows and Linux drivers and SDK are available in the document section below.

$979.00

Out of stock

SKU: 157 Categories: Industrial Cameras, Sentech Cameras, USB Cameras

18 Month Extended Warranty

Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.

Look for the 18 Month Warranty Gold Seal for participating products.

Description Specifications Documents

Product Description

SenTech STC-MBCM200U3V-IR Megapixel HighSpeed Near Infrared CMOSIS w/ Gige Vision

The MBCM200U3V-IR camera features a 2/3″ CMOSIS Sensor with a 2048×1088 pixel array capable of full frame rates of 167 Hz. The imaging sensor has enhanced sensitivity from 690nm to 1000nm. It has an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D). SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.

Features:

Gige Vision Compliant
Enhanced Near Infrared Response
2/3″ 2M CMOSIS (CMV2000）
167 Full Frames Per Second
Global Shutter
10 bit ADC 8 or 10 bit Raw data
Opt-isolated I/O

Sentech’s USB SDK and driver software kits provides support for Windows Xp, 7, 8, and 10, 32-bit and 64-bit, as well as Linux. The following software application drivers are included:

Viewer Software (StCamSWare v3.10)
Windows Driver
Standard SDK v3.10
Trigger SDK v3.07
Linux Driver
LabVIEW Driver
MatLabDriver

STC-MBCM200U3V-IR Details

Imaging Device
Image Sensor	2/3" 2MP Near IR CMOS
Active Picture Element	2048 (H) x 1088 (V)
Cell Size	5.5 (H) x 5.5 (V) μm

Function
Scanning System	Progressive
Shutter Type	Global Shutter
Scanning Mode	Full Scanning, Variable ROI (Horizontal and Vertical)
Maximum Frame Rate (Full Scanning Mode)	2M: 2048 x 1080: 167fps (Raw 8bit); Frame rate will drop if connected with the USB 2.0 port
Maximum Frame Rate (AOI Mode)	1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps
Sync System	Internal
Video Output Format	RAW 8bit / 10bit / 12bit (Default Raw 8bit)
S/N Ratio	Less than TBD digit (Gain 0 dB)
Minimum Scene Illumination	TBD
Electronic Shutter	Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode)
Gain	-
- Analog (Gain)	Not supported
- Digital (Gain)	0 ～ 13.9 dB (Default 0dB)
Offset (Analog)	0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit
ROI	ROI (Horizontal：32 to 2048 pixels / Vertical：32 to 1088 lines); (Default: 2048 x 1088） Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction
Binning Function	N/A
Decimation Function	x2, x4 Vertical Decimation
ALC	AE, AGC (Default AE:OFF, AGC:OFF
White Balance	Auto, Manual, One Push (Default: Manual)
HDR	Not supported
Mirror Image	Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Defect Correction	Up to 64 pixels (Default: ON）
Operational Mode	Free-run / Edge-Preset Trigger / Pulse Width Trigger
User Setting Storage	Supported
Interface	USB 3.0 Super Speed (USB 3.0 Micro B)
Input / Output	Three GPIO, One Camera Hardware Reset
Power	-
- Input Voltage	+5V (typ.) (Conform to USB Standard)
- Communication	Less than TBD W

Mechanical
Dimensions	C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors
Lens Mount	C Mount
Optical Filter	IR cut filter
Optical Center Accuracy	Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg.
Weight	Approx. 52g
Interface Connector	USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent

Environmental
Operating Temperature	-
- Minimum	Environmental Temperature: -5°C
- Maximum	Camera housing temperature (top plate) shall not exceed 55°C
Storage Temperature	Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration	20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each
Shock	Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each
Standard Compliancy	TBD (EMS: EN61000-6-2, EMI: EN55011)
RoHS	RoHS Compliant

Visit Sentech America For Additional Information

Documents

DescriptionTypeSizeDownload


STC-MBCM200U3V-IR Datasheet	PDF	5.1M	Download File
STC-MBCM200U3V-IR User Guide	PDF	2.2M	Download File
Mechanical Drawings	PDF	75k	Download File
USB Windows SDK & Drivers	Zip	280Mb	Download File

About us

Industrial Camera Sales works with top level distributors for all major vision hardware manufacturers and drop ships to you on razor thing margins to bring you the best value. Our goal is to simply streamline your purchasing process, saving you time and money.

SenTech 2.0 Megapixel Near IR Highspeed USB