SenTech 4.0 MegaPixel Near IR Highspeed GigE

SenTech 4.0 MegaPixel Near IR Highspeed GigE

The CMB4MPOE-IR is 4 Megapixel Near Infrared (2048 x 2048) GigE Vision compliant camera with a 1″ CMOSIS Sensor capable of frame rates up to 25 Hz. It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications.  Windows and Linux drivers and SDK are available in the document section below.

$1,669.00

18 Month Extended Warranty
Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.
Look for the 18 Month Warranty Gold Seal for participating products.

Product Description

SenTech STC-CMB4MPOE-IR Megapixel HighSpeed Near Infrared CMOSIS w/ Gige Vision

The CMC4MPOE-IR Near IR camera features a 1″ CMOSIS Sensor with a 20248×2048 pixel array capable of full frame rates of 25 Hz. It has an enhanced Near IR response from 780nm to 1000nm.  It has an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.

Features:

  • Gige Vision Compliant
  • Enhanced Near Infrared Response
  • 1 “ 4M CMOSIS (CMV4000)
  • 25 Full Frames Per Second
  • Global Shutter
  • Up to 64 Pixel Blemish Static Correction
  • 10 bit ADC  8 or 10 bit Raw data
  • Opt-isolated I/O
STC-CMB4MPOE-IR Details
Imaging Device
Image Sensor 1" 4 MP Near IR CMOSIS (CMV4000)
Shutter Type Global Shutter
Total Picture Element 2048 (H) x 2048 (V)
Active Picture Element 2048 (H) x 2048 (V)
Cell Size 5.5 (H) x 5.5 (V) μm
Functions
Scanning System Progressive
Vertical Frequency (Frame Rate) 25 Hz at full resolution (12.5Hz on 10bit for ether net bandwidth limitation), 1.00000 to 4000 Hz adjustable via the communication, (Frame rate depends on the AOI setting), Maximum frame rate (4000 Hz) is when vertical resolution AOI setting is 32.
Horizontal Frequency 54.4 kHz
Pixel Frequency 120 MHz (2TAP), 80 Hz (1TAP)
Noise Level -
- @ 8 Bit Output <= 2.5 Digit (Gain 0 dB)
- @ 10 Bit Output <= 15 Digit (Gain 0 dB)
Minimum Scene Illumination Less than 1 Lux @ F1.2, 50 Hz
Sync System Internal
Video Output Format Digital 8, 10 bit Raw data or RGB 8 bit (Default:8bit Raw)
Interface IEEE802.3 (1000BASE-T)
Protocol GigE Vision® 1.2 and GenICam™ 2.0 Compliant
Exposure Time Preset continuous mode: 25 microseconds to 2000 milliseconds, Preset trigger mode:25 microseconds to 2000 milliseconds, Pulse width mode: 25 microseconds to 2000 milliseconds
ALC (Automatic Light Compensation) Automatic Exposure (AE) and Automatic Gain Control (AGC) (ON/OFF) (adjustable via the communication), (Default: AE OFF, AGC ON)
Gain x1 to x3 (Default: x1)
Gamma Gamma 1.0 (Factory default) or uploadable gamma table (Default:1)
AOI Function Variable AOI setting via the communication
Color Interpolation Available on RGB Output (Default:ON)
White Balance Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF)
Operating Mode Edge preset trigger, Pulse width trigger (Default:OFF)
Communication UART Communication through Ethernet port
I/Os One opt-isolated input and two open collector outputs(+3.3V)
Mechanical
Power -
- Input Voltage +10.8 ~ +26.4 Vdc
- Consumption Less than 3.6 W
Dimensions 35 (W) x 35 (H) x 55.9 (D) mm excluding connectors
Optical Filter No Filter
Optical Center Accuracy Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg
Material Aluminum (AC)
Lens Mount C Mount
Connectors RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount Screws Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)
Weight Approx. 120g
Environmental
Operating Temperature -
- Minimum Environmental Temperature: -5°C
- Maximum Camera housing temperature (top plate) shall not exceed 65⁰C, (This corresponds to an environmental temperature of approximately 35⁰C)
Storage Temperature Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration 20Hz ~ 200Hz ~ 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS Compliant
SOURCE: Sources
Documents
DescriptionTypeSizeDownload
STC-CMB4MPOE-IR Datasheet PDF 5.1M Download File
STC-CMB4MPOE-IR User Guide PDF 2.2M Download File
Mechanical Drawings DXF 75k Download File
Gige Windows SDK & Drivers DXF 280Mb Download File
GigE Linux Drivers DXF 7Mb Download File
Kowa Video Lenses
Fujinon Machine Vision Lenses
Hitachi Industrial Cameras
Sony Industrial Vision
USB3 Machine Vision
Gigabit Ethernet - GIGe