SenTech 2.0 Megapixel B&W HighSpeed CMOSIS USB

SenTech 2.0 Megapixel B&W HighSpeed CMOSIS USB

The MBCM200U3V is 2 Megapixel B&W (2048 x 1088) USB3 Vision compliant camera with a 2/3″ CMOSIS Sensor capable of frame rates up to 167 Hz.  It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications.  Windows and Linux drivers and SDK are available in the document section below.


18 Month Extended Warranty
Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.
Look for the 18 Month Warranty Gold Seal for participating products.

Product Description

SenTech STC-MBCM200U3V Megapixel HighSpeed B&W CMOSIS w/ Gige Vision

The MBCM200U3V camera features a 2/3″ CMOSIS Sensor with a 2048×1088 pixel array capable of full frame rates of 167 Hz. It has an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.


  • Gige Vision Compliant
  • Enhanced Near Infrared Response
  • 2/3″ 2M CMOSIS (CMV2000)
  • 167 Full Frames Per Second
  • Global Shutter
  • 12 bit ADC  8, 10, or 12 bit Raw data
  • Up to 64 Pixel Blemish Static Correction

Sentech’s USB SDK and driver software kits provides support for Windows Xp, 7, 8, and 10, 32-bit and 64-bit, as well as Linux. The following software application drivers are included:

  • Viewer Software (StCamSWare v3.10)
  • Windows Driver
  • Standard SDK v3.10
  • Trigger SDK v3.07
  • Linux Driver
  • LabVIEW Driver
  • MatLabDriver
STC-MBCM200U3V-IR Details
Imaging Device
Image Sensor 2/3" 2MP Near IR CMOS
Active Picture Element 2048 (H) x 1088 (V)
Cell Size 5.5 (H) x 5.5 (V) μm
Scanning System Progressive
Shutter Type Global Shutter
Scanning Mode Full Scanning, Variable ROI (Horizontal and Vertical)
Maximum Frame Rate (Full Scanning Mode) 2M: 2048 x 1080: 167fps (Raw 8bit); Frame rate will drop if connected with the USB 2.0 port
Maximum Frame Rate (AOI Mode) 1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps
Sync System Internal
Video Output Format RAW 8bit / 10bit / 12bit (Default Raw 8bit)
S/N Ratio Less than TBD digit (Gain 0 dB)
Minimum Scene Illumination TBD
Electronic Shutter Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode)
Gain -
- Analog (Gain) Not supported
- Digital (Gain) 0 ~ 13.9 dB (Default 0dB)
Offset (Analog) 0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit
ROI ROI (Horizontal:32 to 2048 pixels / Vertical:32 to 1088 lines); (Default: 2048 x 1088) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction
Binning Function N/A
Decimation Function x2, x4 Vertical Decimation
White Balance Auto, Manual, One Push (Default: Manual)
HDR Not supported
Mirror Image Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Defect Correction Up to 64 pixels (Default: ON)
Operational Mode Free-run / Edge-Preset Trigger / Pulse Width Trigger
User Setting Storage Supported
Interface USB 3.0 Super Speed (USB 3.0 Micro B)
Input / Output Three GPIO, One Camera Hardware Reset
Power -
- Input Voltage +5V (typ.) (Conform to USB Standard)
- Communication Less than TBD W
Dimensions C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors
Lens Mount C Mount
Optical Filter IR cut filter
Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg.
Weight Approx. 52g
Interface Connector USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Operating Temperature -
- Minimum Environmental Temperature: -5°C
- Maximum Camera housing temperature (top plate) shall not exceed 55°C
Storage Temperature Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration 20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each
Shock Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each
Standard Compliancy TBD (EMS: EN61000-6-2, EMI: EN55011)
RoHS RoHS Compliant
STC-MBCM200U3V Datasheet PDF 5.1M Download File
STC-MBCM200U3V User Guide PDF 2.2M Download File
Mechanical Drawings PDF 75k Download File
GigE Windows SDK & Drivers Zip 280Mb Download File
Kowa Video Lenses
Fujinon Machine Vision Lenses
Hitachi Industrial Cameras
Sony Industrial Vision
USB3 Machine Vision
Gigabit Ethernet - GIGe