SenTech 2.0 Megapixel Near IR Highspeed USB

SenTech 2.0 Megapixel Near IR Highspeed USB

The MBCM200U3V-IR is 2 Megapixel Near Infrared (2048 x 1088) USB3 Vision compliant camera with a 2/3″ CMOSIS Sensor capable of frame rates up to 167 Hz.  It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications.  Windows and Linux drivers and SDK are available in the document section below.


18 Month Extended Warranty
Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.
Look for the 18 Month Warranty Gold Seal for participating products.

Product Description

SenTech STC-MBCM200U3V-IR Megapixel HighSpeed Near Infrared CMOSIS w/ Gige Vision

The MBCM200U3V-IR camera features a 2/3″ CMOSIS Sensor with a 2048×1088 pixel array capable of full frame rates of 167 Hz. The imaging sensor has enhanced sensitivity from 690nm to 1000nm.  It has an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D).  SenTech GigE Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.


  • Gige Vision Compliant
  • Enhanced Near Infrared Response
  • 2/3″ 2M CMOSIS (CMV2000)
  • 167 Full Frames Per Second
  • Global Shutter
  • 10 bit ADC  8 or 10 bit Raw data
  • Opt-isolated I/O

Sentech’s USB SDK and driver software kits provides support for Windows Xp, 7, 8, and 10, 32-bit and 64-bit, as well as Linux. The following software application drivers are included:

  • Viewer Software (StCamSWare v3.10)
  • Windows Driver
  • Standard SDK v3.10
  • Trigger SDK v3.07
  • Linux Driver
  • LabVIEW Driver
  • MatLabDriver
STC-MBCM200U3V-IR Details
Imaging Device
Image Sensor 2/3" 2MP Near IR CMOS
Active Picture Element 2048 (H) x 1088 (V)
Cell Size 5.5 (H) x 5.5 (V) μm
Scanning System Progressive
Shutter Type Global Shutter
Scanning Mode Full Scanning, Variable ROI (Horizontal and Vertical)
Maximum Frame Rate (Full Scanning Mode) 2M: 2048 x 1080: 167fps (Raw 8bit); Frame rate will drop if connected with the USB 2.0 port
Maximum Frame Rate (AOI Mode) 1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps
Sync System Internal
Video Output Format RAW 8bit / 10bit / 12bit (Default Raw 8bit)
S/N Ratio Less than TBD digit (Gain 0 dB)
Minimum Scene Illumination TBD
Electronic Shutter Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode)
Gain -
- Analog (Gain) Not supported
- Digital (Gain) 0 ~ 13.9 dB (Default 0dB)
Offset (Analog) 0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit
ROI ROI (Horizontal:32 to 2048 pixels / Vertical:32 to 1088 lines); (Default: 2048 x 1088) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction
Binning Function N/A
Decimation Function x2, x4 Vertical Decimation
White Balance Auto, Manual, One Push (Default: Manual)
HDR Not supported
Mirror Image Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Defect Correction Up to 64 pixels (Default: ON)
Operational Mode Free-run / Edge-Preset Trigger / Pulse Width Trigger
User Setting Storage Supported
Interface USB 3.0 Super Speed (USB 3.0 Micro B)
Input / Output Three GPIO, One Camera Hardware Reset
Power -
- Input Voltage +5V (typ.) (Conform to USB Standard)
- Communication Less than TBD W
Dimensions C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors
Lens Mount C Mount
Optical Filter IR cut filter
Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg.
Weight Approx. 52g
Interface Connector USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Operating Temperature -
- Minimum Environmental Temperature: -5°C
- Maximum Camera housing temperature (top plate) shall not exceed 55°C
Storage Temperature Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration 20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each
Shock Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each
Standard Compliancy TBD (EMS: EN61000-6-2, EMI: EN55011)
RoHS RoHS Compliant
STC-MBCM200U3V-IR Datasheet PDF 5.1M Download File
STC-MBCM200U3V-IR User Guide PDF 2.2M Download File
Mechanical Drawings PDF 75k Download File
USB Windows SDK & Drivers Zip 280Mb Download File
Kowa Video Lenses
Fujinon Machine Vision Lenses
Hitachi Industrial Cameras
Sony Industrial Vision
USB3 Machine Vision
Gigabit Ethernet - GIGe