SenTech 4.0 Megapixel Near IR Highspeed USB

You cannot add "SenTech 4.0 Megapixel B&W HighSpeed USB3" to the cart because the product is out of stock.

SenTech 4.0 Megapixel Near IR Highspeed USB

The MBCM401UV3-IR is 4 Megapixel Near Infrared (2048 x 2048) USB3 Vision compliant camera with a 1″ CMOSIS Sensor capable of frame rates up to 89 Hz.  It has a compact rugged design measuring 28mm (W) x 28mm (H) x 40mm (D).  SenTech USB3 Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications.  Windows and Linux drivers and SDK are available in the document section below.

$1,365.00

Out of stock

18 Month Extended Warranty
Purchase a participating product and if it fails under normal use within 18 months, we'll ship you a replacement free of charge.
Look for the 18 Month Warranty Gold Seal for participating products.

Product Description

SenTech STC-MBCM401U3V-IR 4 Megapixel HighSpeed Near Infrared CMOSIS w/ USB3 Vision

The MBCM401U3V-IR Near IR Camera features a 1″ CMOSIS Sensor with a 20248×2048 pixel array capable of full frame rates of 89 Hz.  It has enhanced near IR response from 680nm to 1000nm. and an ultra compact design measuring just 28mm (W) x 28mm (H) x 40mm (D).  SenTech USB3 Vision cameras feature Pleora drive hardware providing compatibility with a wide variety of software applications and drivers.

Features:

  • USB3 Vision Compliant
  • 1“ 4M CMOSIS
  • Enhanced Near IR Response
  • 89 Full Frames Per Second
  • Global Shutter
  • High Speed Binning Mode to 32×32
  • Pixel Defect Correction
  • 12 bit ADC  8, 10, or 12 bit Raw data
  • Three GPIO, One Camera Hardware Reset

Sentech’s USB SDK and driver software kits provides support for Windows Xp, 7, 8, and 10, 32-bit and 64-bit, as well as Linux. The following software application drivers are included:

  • Viewer Software (StCamSWare v3.10)
  • Windows Driver
  • Standard SDK v3.10
  • Trigger SDK v3.07
  • Linux Driver
  • LabVIEW Driver
  • MatLabDriver
STC-MBCM401UV3-IR Details
Imaging Device
Image Sensor 1" 4 MP Near IR CMOSIS
Active Picture Element 2048 (H) x 2048 (V)
Cell Size 5.5 (H) x 5.5 (V) μm
Function
Scanning System Progressive
Shutter Type Global Shutter
Scanning Mode Full Scanning, Variable ROI (Horizontal and Vertical)
Maximum Frame Rate (Full Scanning Mode) 4M: 2048 x 2048: 89fps (Raw 8bit), 45fps(Raw10bit), 37fps(Raw12bit) *Frame rate will drop if connected with the USB 2.0 port
Maximum Frame Rate (AOI Mode) 1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps
Sync System Internal
Video Output Format RAW 8bit / 10bit / 12bit (Default Raw 8bit)
S/N Ratio Less than 3 digit (Gain 0 dB)
Minimum Scene Illumination TBD Lux @ F1.2
Electronic Shutter Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode)
Gain -
- Analog (Gain) Not supported
- Digital (Gain) 0 ~ 13.9 dB (Default 0dB)
Offset (Analog) 0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit
ROI ROI (Horizontal:32 to 2048 pixels / Vertical:32 to 2048 lines); (Default: 2048 x 2048) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction
Binning Function N/A
Decimation Function x2, x4 Vertical Decimation
ALC AE, AGC (Default AE:OFF, AGC:OFF
White Balance Auto, Manual, One Push (Default: Manual)
HDR N/A
Mirror Image Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Defect Correction Up to 64 pixels (Default: ON)
Operational Mode Free-run / Edge-Preset Trigger / Pulse Width Trigger
User Setting Storage Supported
Interface USB 3.0 Super Speed (USB 3.0 Micro B)
Input / Output Three GPIO, One Camera Hardware Reset
Power -
- Input Voltage +5V (typ.) (Conform to USB Standard)
- Communication Less than TBD W
Mechanical
Dimensions C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors
Lens Mount C Mount
Optical Filter IR cut filter
Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg.
Weight Approx. 52g
Interface Connector USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Environmental
Operating Temperature -
- Minimum Environmental Temperature: -5°C
- Maximum Camera housing temperature (top plate) shall not exceed 55°C
Storage Temperature Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration 20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each
Shock Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each
Standard Compliancy TBD (EMS: EN61000-6-2, EMI: EN55011)
Documents
DescriptionTypeSizeDownload
STC-MBCM401U3V-IR Datasheet PDF 5.0M Download File
STC-MBCM401U3V-IR User Guide PDF 1.0M Download File
Mechanical Drawings PDF 100k Download File
USB Windows SDK & Drivers Zip 70Mb Download File
You may also like…