|
|
| IMAGING |
- |
| Model No |
STC-MCCM401U3V |
| Image Sensor |
1" 4 MP Color CMOS (CMOSIS: CMV4000) |
| Active Picture Element |
2048 (H) x 2048 (V) |
| Cell Size |
5.5 (H) x 5.5 (V) μm |
|
|
| FUNCTIONS |
- |
| Scanning System |
Progressive |
| Shutter Type |
Global Shutter |
| Scanning Mode |
Full Scanning, Variable ROI (Horizontal and Vertical) |
| Maximum Frame Rate (Full Scanning Mode) |
4M: 2048 x 2048: 89fps (Raw 8bit), 45fps(Raw10bit), 37fps(Raw12bit) *Frame rate will drop if connected with the USB 2.0 port |
| Maximum Frame Rate (AOI Mode) |
1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps |
| Sync System |
Internal |
| Video Output Format |
RAW 8bit / 10bit / 12bit (Default Raw 8bit) |
| S/N Ratio |
Less than 3 digit (Gain 0 dB) |
| Minimum Scene Illumination |
TBD Lux @ F1.2 |
| Electronic Shutter |
Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode) |
| Gain |
- |
| - Analog (Gain) |
Not supported |
| - Digital (Gain) |
0 ～ 13.9 dB (Default 0dB) |
| Offset (Analog) |
0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit |
| ROI |
ROI (Horizontal：32 to 2048 pixels / Vertical：32 to 2048 lines); (Default: 2048 x 2048） Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction |
| Binning Function |
N/A |
| Decimation Function |
x2, x4 Vertical Decimation |
| ALC |
AE, AGC (Default AE:OFF, AGC:OFF |
| White Balance |
Auto, Manual, One Push (Default: Manual) |
| HDR |
N/A |
| Mirror Image |
Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
| Pixel Defect Correction |
Up to 64 pixels (Default: ON） |
| Operational Mode |
Free-run / Edge-Preset Trigger / Pulse Width Trigger |
| User Setting Storage |
Supported |
| Interface |
USB 3.0 Super Speed (USB 3.0 Micro B) |
| Input / Output |
Three GPIO, One Camera Hardware Reset |
| Power |
- |
| - Input Voltage |
+5V (typ.) (Conform to USB Standard) |
| - Communication |
Less than TBD W |
|
|
| MECHANICAL |
- |
| Dimensions |
C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors |
| Lens Mount |
C Mount |
| Optical Filter |
IR cut filter |
| Optical Center Accuracy |
Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
| Weight |
Approx. 52g |
| Interface Connector |
USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent |
|
|
| ENVIRONMENTAL |
|
| Operating Temperature |
- |
| - Minimum |
Environmental Temperature: -5°C |
| - Maximum |
Camera housing temperature (top plate) shall not exceed 55°C |
| Storage Temperature |
Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85% |
| Vibration |
20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
| Shock |
Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each |
| Standard Compliancy |
TBD (EMS: EN61000-6-2, EMI: EN55011) |
